On-Board Bartec Recovery Solution; Bartec Recovery Solution; Start Of The Device In The Recovery Mode; Recovery Surroundings - Bartec POLARIS PROFESSIONAL B7-72V1 Series User Manual

POLARIS PROFESSIONAL
POLARIS Panel PC Professional 15" up to 24"
7.3

On-board Bartec Recovery Solution

7.3.1

Bartec Recovery Solution

7.3.2

Start of the device in the Recovery mode

7.3.3

Recovery surroundings

Technical data subject to change without notice.
08/2019
- for Zone 2 / 22
The Bartec HMI Polaris Smart devices are equipped with an On-Board-Recovery solution.
The Bartec Recovery is a software package preloaded on the devices which serves the
disregard of the device in the work state. In case of a mistake every device can be booted
up in the Recovery mode to move afterwards the operating system into the work state.
No other software is necessary for the restoration. The Recovery service already disposes
of all necessary program routines or the Recovery-Wizard to play in the operating system
anew. The process can be carried out any time if necessary also on site. The duration of
the process amounts approx. 25 minutes.
To change in the Recovery mode, one must press the F6 key while booting up the device.
This possibility is available for approx. 10 sec. During this time the announcement "Press
F6 key to start Bartec Recovery" appears on the screen.
ATTENTION
All data on Windows partition are definitely extinguished during the recovery of
process!
All self-provided data or use data should be protected from starting the recovery.

For the Recovery mode the hard disk contains a hidden partition to the storage of the
Recover engine and the image file (effigy of the operating system). If the Recovery partition
exists not any more or is damaged, the device can be restored only from an external
medium or USB Flash drive.
The hidden partition is approx. 10 GB. That's why the available storage space on the hard
disk is lower than the given capacity.
The Recovery mode bases on a slender Windows operating system or so-called PE
surroundings (Windows Preinstallation Environment). Besides, Windows starts only with a
basic equipment of services and drivers.
Illustration 18: Start Windows PE.
Operation
49/66