Table of Contents
Advertisement
Quick Links
User Manual - TRANSLATION
POLARIS PROFESSIONAL
POLARIS Panel PC Professional 10.4" / 12.1" / 12.1" W
Typ B7-72V1-....
ATEX
Zone 2 and Zone 22
Document no. B1-72V1-7D0002
Revision 1 / Status: August 2020
Reservation: Technical data subject to change without notice. Changes, errors and
misprints may not be used as a basis for any claim for damages.
GmbH
Max-Eyth-Straße 16
97980 Bad Mergentheim
GERMANY
Content
English
Phone: +49 7931 597-0
Fax: +49 7931 597-119
Pages
1-65
Support:
support-polaris@bartec.de
Download:
http://automation.bartec.de
Internet:
www.bartec.de
Advertisement
Table of Contents
Related Manuals for Bartec POLARIS B7-72V1 Series
Summary of Contents for Bartec POLARIS B7-72V1 Series
- Page 1 Reservation: Technical data subject to change without notice. Changes, errors and misprints may not be used as a basis for any claim for damages. Content Pages English 1-65 GmbH Max-Eyth-Straße 16 Phone: +49 7931 597-0 Support: support-polaris@bartec.de 97980 Bad Mergentheim Fax: +49 7931 597-119 Download: http://automation.bartec.de GERMANY Internet: www.bartec.de...
- Page 3 POLARIS PROFESSIONAL - for Zone 2/22 Table of Contents POLARIS Panel PC Professional 10,4” / 12,1” / 12,1” W Technical data subject to change. 09/2017...
-
Page 4: Table Of Contents
POLARIS PROFESSIONAL - for Zone 2/22 Table of Contents POLARIS Panel PC Professional 10,4” / 12,1” / 12,1” W Basic safety instructions ........................1 Notes on this manual ........................ 1 1.1.1 Languages ........................2 1.1.2 Changes in the document ..................... 2 Handling the product ......................... - Page 5 Commissioning Software ......................46 8.2.1 Windows 10 Iot Enterprise LRSB ................46 8.2.2 Windows 7 Ultimate ....................47 On-board Bartec Recovery Solution ..................47 8.3.1 Bartec Recovery Solution ................... 47 8.3.2 Start of the device in the Recovery mode ..............47 8.3.3 Recovery surroundings ....................
- Page 6 POLARIS PROFESSIONAL - for Zone 2/22 Table of Contents POLARIS Panel PC Professional 10,4” / 12,1” / 12,1” W Additional information ........................64 Declaration of conformity ......................... 65 Technical data subject to change. 09/2017...
- Page 7 POLARIS PROFESSIONAL - for Zone 2/22 Table of Contents POLARIS Panel PC Professional 10,4” / 12,1” / 12,1” W Technical data subject to change. 09/2017...
-
Page 9: Basic Safety Instructions
The BARTEC company reserves the right to carry out technical changes at any time. In no event will BARTEC company be responsible or liable for indirect or consequential damages resulting from the use or application of this user manual. -
Page 10: Languages
1.1.2 Changes in the document BARTEC reserves the right to change the content of this document without notification. No warranty is assumed for the correctness of the information. In cases of doubt, the German safety instructions apply because it is not possible to rule out errors of translation or printing. -
Page 11: Unintended Use
POLARIS PROFESSIONAL - for Zone 2/22 Basic POLARIS Panel PC Professional 10,4” / 12,1” / 12,1” W safety instructions 1.3.2 Unintended use Any other use is not in accordance with the intended purpose and can cause damage and accidents. The manufacturer will not be liable for any use beyond that of its exclusive intended purpose. -
Page 12: Servicing
1.6.4 Repairs Repairs to explosion-proof equipment may only be performed by persons authorized by BARTEC, who must employ the latest technological practices, observe the manufacturer's instructions and use only original spare parts. The applicable regulations are to be observed here. - Page 13 control). BARTEC grants a warranty period of one year on the POLARIS series, starting from the BARTEC delivery date. The warranty period for accessories is 1 year from the date of delivery. This warranty covers all parts of the delivery and is limited to the free-of-charge replacement of or repair of the defective parts by BARTEC.
-
Page 14: Product Description
Wired electrical connections are made via integrated terminal compartments. The use of the BARTEC memory stick through the intrinsically safe USB interface allows data to be transferred easily, stored, and saved for system restoration by means of the backup function. -
Page 15: Schematic Design
POLARIS PROFESSIONAL - for Zone 2/22 Product description POLARIS Panel PC Professional 10,4” / 12,1” / 12,1” W Standard assembly of the POLARIS PROFESSIONAL series is mounting on the front panel which can be performed quickly and easily. On request we also supply the POLARIS PROFESSIONAL series as turn-key system solution in a stainless steel enclosure for wall and floor mounting. -
Page 16: Explosion Protection And Approvals
Explosion protection and POLARIS PROFESSIONAL - for Zone 2/22 approvals POLARIS Panel PC Professional 10,4” / 12,1” / 12,1” W Explosion protection and approvals POLARIS Panel PC Professionel Type B7-72V1-…. ATEX II 3G Ex nA IIC T4. Ex protection type II 3D Ex tb IIIC T120°... -
Page 17: Technical Data
POLARIS PROFESSIONAL - for Zone 2/22 Technical data POLARIS Panel PC Professional 10,4” / 12,1” / 12,1” W Technical data POLARIS PROFESSIONAL Front panel fitting Construction Optional turnkey system solutions in a stainless steel enclosure as floor or wall mounting. Intel®... -
Page 18: Characteristics Polaris Panel Pc 10.4
POLARIS PROFESSIONAL for Zone 2/22 Technical data POLARIS Panel PC Professional 10,4” / 12,1” / 12,1” W 4.1.1 Characteristics POLARIS Panel PC 10.4" 10.4" graphics-capable TFT colour display Display SVGA resolution 800 x 600 pixels 262,144 colours Brightness 400 cd/m Visible surface approx. -
Page 19: Characteristics Polaris Panel Pc 12.1
POLARIS PROFESSIONAL - for Zone 2/22 Technical data POLARIS Panel PC Professional 10,4” / 12,1” / 12,1” W 4.1.2 Characteristics POLARIS Panel PC 12.1" 12.1" graphics-capable TFT colour display Display XGA resolution 1024 x 768 pixels 15.6 mio. colours Brightness 500 cd/m Visible surface approx. -
Page 20: Characteristics Polaris Panel Pc 12.1" W
POLARIS PROFESSIONAL for Zone 2/22 Technical data POLARIS Panel PC Professional 10,4” / 12,1” / 12,1” W 4.1.3 Characteristics POLARIS Panel PC 12.1" W 12,1" graphics-capable TFT colour display Display WXGA resolution 1280 x 800 pixels 1 colours Brightness 500 cd/m Visible surface approx. -
Page 21: Keyboard
POLARIS PROFESSIONAL - for Zone 2/22 Technical data POLARIS Panel PC Professional 10,4” / 12,1” / 12,1” W Keyboard 4.2.1 Explosion Protection B7-72VZ-40.. Type II 3G Ex nA IIC Gc Ex protection type ATEX II 3D Ex tc IIIC T120°C Dc -20 °C ≤... -
Page 22: Characteristics Of Enclosure For Mouse And Keyboard
POLARIS PROFESSIONAL for Zone 2/22 Technical data POLARIS Panel PC Professional 10,4” / 12,1” / 12,1” W 4.2.3 Characteristics of enclosure for mouse and keyboard 05-0041-0277 Order no. Stainless steel 1.4301; AISI 304 Material Dimensions 600 mm x 85 mm x 220 mm (width x height x depth) IP65 Protection class... -
Page 23: Variants
POLARIS PROFESSIONAL - for Zone 2/22 Technical data POLARIS Panel PC Professional 10,4” / 12,1” / 12,1” W Dimensions (width x height) 130 mm x 170 mm Wall cut out (width x height) 100 mm x 140 mm Dimensions and wall cut-out (mm) 4.3.3 Variants Type 17-71VZ-1000... -
Page 24: Usb Smart Device
POLARIS PROFESSIONAL for Zone 2/22 Technical data POLARIS Panel PC Professional 10,4” / 12,1” / 12,1” W USB Smart Device 4.4.1 Explosion protection M30 x 1,5 (suitable for fixing holes 30,3mm Fastening with recess for anti-twist safeguard) Wall thickness 1mm to 6mm Installation impact resistance: 7Nm 2,8 to 3,4 Nm... -
Page 25: Technical Data (Wlan)
POLARIS PROFESSIONAL - for Zone 2/22 Technical data POLARIS Panel PC Professional 10,4” / 12,1” / 12,1” W Bluetooth WLAN For the wireless network connection. 4.4.3 Technical data (WLAN) IEEE802.11n Wifi - standard IEEE802.11g IEEE802.11b max. 150 Mbit/s Transfer rate 2.4 GHz WLAN - frequency For more technical data see description of the W-LAN-stick manufacturer. -
Page 26: Product Labelling
POLARIS PROFESSIONAL for Zone 2/22 Technical data POLARIS Panel PC Professional 10,4” / 12,1” / 12,1” W Product Labelling Example: Type label with label ATEX Warnings on the device Warning on terminal compartment! depending on the operating system License sticker Test sticker Technical data subject to change. -
Page 27: Transport, Storage, Scope And Assembly
A written report of any transport damage or missing items must be given to the appointed forwarder and to BARTEC GmbH immediately on receipt of the delivery. Damage caused by incorrect storage and transport shall not fall within the warranty provisions of BARTEC GmbH. -
Page 28: Assembly
Transport, Storage, POLARIS PROFESSIONAL- for Zone 2/22 Scope and Assembly POLARIS Panel PC Professional 10,4” / 12,1” / 12,1” W Assembly Before assembling the device, make sure you have all the components and documents. POLARIS 1 x hex key 3 mm Required (mounting clamps) 1 x slotted screwdriver... -
Page 29: Installation
POLARIS BASIC - for Zone 1 / 21 Commissioning POLARIS Panel PCs 5.7" / 10.4" / 12.1" Installation We recommend setting up and testing the entire system before its ultimate installation in the ex-area. If a long connection cable is not available, please use a patch cable to test the basic functions. -
Page 30: Mechanical Installation
POLARIS PROFESSIONAL- for Zone 2/22 Commissioning POLARIS Panel PC Professional 10,4” / 12,1” / 12,1” W Choose the optimum height for operating the POLARIS. – Ensure good lighting conditions for a perfectly legible display – (no direct exposure to the sun’s rays). Do not mount in direct proximity to switching or current changing devices. -
Page 31: Installation In 3G-/3D-Enclosure
POLARIS BASIC - for Zone 1 / 21 Commissioning POLARIS Panel PCs 5.7" / 10.4" / 12.1" 6.2.1 Installation in 3G-/3D-enclosure In order to guarantee the IP degree of enclosure protection = IP54 for installation in 3G enclosures of protection (e.g. control equipment), and = IP6X for installation in 3D enclosures in areas where combustible dusts exist - with “protection through the enclosure”... -
Page 32: Installation As A System Solution In The Stainless Steel Enclosure
POLARIS PROFESSIONAL- for Zone 2/22 Commissioning POLARIS Panel PC Professional 10,4” / 12,1” / 12,1” W Work steps (1) Insert the POLARIS into the cut-out in the enclosure. (2) From the back, place the reinforcement frame over the POLARIS. (3) Using the M4x12 (2) screws to fasten the mounting clamps (1) to the rear side of the POLARIS and tighten to 1.37 Nm. -
Page 33: Floor Mounting
POLARIS BASIC - for Zone 1 / 21 Commissioning POLARIS Panel PCs 5.7" / 10.4" / 12.1" Stainless steel enclosure "Standard" for floor and wall mounting Type Dimensions (Width x Height x Depth) POLARIS 10.4″ / 12.1" W 560 mm x 320 mm x 200 mm POLARIS 12.1″... -
Page 34: Wall Mounting
POLARIS PROFESSIONAL- for Zone 2/22 Commissioning POLARIS Panel PC Professional 10,4” / 12,1” / 12,1” W 6.2.4 Wall mounting (Stainless steel enclosure : Illustration 9: Drilling pattern - supporting system for wall mounting Technical data subject to change. EN 26/65 09/2020... -
Page 35: Electrical Installation
POLARIS BASIC - for Zone 1 / 21 Commissioning POLARIS Panel PCs 5.7" / 10.4" / 12.1" Electrical Installation 6.3.1 Installation guidelines Only qualified personnel, i.e. trained electricians will have the required specialised knowledge to be able to do all the electrical work. Familiarity with and the technically perfect implementation of the safety instructions described in this manual are preconditions for safe installation and commissioning. -
Page 36: Terminal Compartments
POLARIS PROFESSIONAL- for Zone 2/22 Commissioning POLARIS Panel PC Professional 10,4” / 12,1” / 12,1” W Terminal compartments DANGER Sealed locking screw! The device is closed in the factory. The explosion protection is lost if opened, and danger to life exists in an explosive atmosphere! Do not open the locking screw! DANGER... -
Page 37: Pe Conductor Connection
POLARIS BASIC - for Zone 1 / 21 Commissioning POLARIS Panel PCs 5.7" / 10.4" / 12.1" PE conductor connection DANGER Death or danger of injury as a result of no PE conductor connection. There is no explosion protection. Equipotential bonding with a core cross-section of at least 4 mm is to be set up for the POLARIS (see Figure). -
Page 38: Terminal Compartments X1
POLARIS PROFESSIONAL- for Zone 2/22 Commissioning POLARIS Panel PC Professional 10,4” / 12,1” / 12,1” W Terminal compartments X1 6.6.1 Cable entries When connecting cables and leads to supplies / communications equipment in increased safety protected areas, Ex certified cable entries must be used which are suitable for each type of cable and lead. -
Page 39: Rs422 Interface
POLARIS BASIC - for Zone 1 / 21 Commissioning POLARIS Panel PCs 5.7" / 10.4" / 12.1" Assignment RJ45 plug for Ethernet to POLARIS terminal block Connection RJ45 POLARIS Signal Terminal PIN 1 PIN 8 not used not used not used not used 6.6.4 RS422 Interface... -
Page 40: Rs485 Interface (Optional)
POLARIS PROFESSIONAL- for Zone 2/22 Commissioning POLARIS Panel PC Professional 10,4” / 12,1” / 12,1” W 6.6.5 RS485 interface (optional) Configuration RS485 Klemme Schnittstelle Signal Bemerkungen N.C. N.C. Interface COM 1 TxD B (TxD+) to PLC Interface COM 1 TxD A (TxD-) N.C. -
Page 41: Profibus-Dp Interfawce (Optional)
- for Zone 1 / 21 Commissioning POLARIS Panel PCs 5.7" / 10.4" / 12.1" 6.6.6 PROFIBUS-DP interfawce (optional) The PROFIBUS DP (BARTEC) interface can be used only in conjunction with the BMS- Graf-pro 7 visualisation software Configuration PROFIBUS-DP Terminal Interface Signal... -
Page 42: Tty Interface (Optional)
POLARIS PROFESSIONAL- for Zone 2/22 Commissioning POLARIS Panel PC Professional 10,4” / 12,1” / 12,1” W 6.6.7 TTY interface (optional) Configuration TTY Terminal Interface Signal Remarks Not connected Not connected Interface COM 1 Signal ground for receiver Interface COM 1 Cathode Interface COM 1 Anode... -
Page 43: Rs 232 Interface
POLARIS BASIC - for Zone 1 / 21 Commissioning POLARIS Panel PCs 5.7" / 10.4" / 12.1" 6.6.8 RS 232 interface Configuration RS232 Terminal Interface Signal Remarks Not connected Not connected Not connected Not connected Not connected Not connected Not connected Interface COM 1 Receive Interface COM 1... -
Page 44: Siemens Profibus-Dp Interface (Optional)
POLARIS PROFESSIONAL- for Zone 2/22 Commissioning POLARIS Panel PC Professional 10,4” / 12,1” / 12,1” W 6.6.9 Siemens PROFIBUS-DP interface (optional) Possible only with the POLARIS Panel PC 12.1"! Configuration Siemens PROFIBUS (supported only WinCC flexible) Terminal Interface Signal Remarks Not connected Not connected Interface COM 1... -
Page 45: Usb Interface (Optional)
POLARIS BASIC - for Zone 1 / 21 Commissioning POLARIS Panel PCs 5.7" / 10.4" / 12.1" 6.6.10 USB interface (optional) Configuration USB Terminal Interface Signal X17 - X22 not connected +5 V Data- USB data signal Data+ USB data signal The individual conductors are colour-coded in a 4-wire USB cable as follows: Panel PC USB connection... -
Page 46: Terminal Compartment X 2
POLARIS PROFESSIONAL- for Zone 2/22 Commissioning POLARIS Panel PC Professional 10,4” / 12,1” / 12,1” W Terminal compartment X 2 When connecting cables and leads to supplies / communications equipment in the Ex area, Ex certified cable entries must be used which are suitable for the respective type of cable and lead. -
Page 47: Power-Limited Usb Interface For Memory Stick
USB socket, 4-pole, Type A The power-limited USB interface (max. 100 mA), socket type A allows data to be transferred easily, stored, and saved for system restoration by means of a BARTEC recovery stick. DANGER Do not insert the memory stick in an explosive atmosphere. -
Page 48: Fibre-Optic Port (Optional)
POLARIS PROFESSIONAL- for Zone 2/22 Commissioning POLARIS Panel PC Professional 10,4” / 12,1” / 12,1” W Fibre-Optic Port (optional 12,1”) For the fibre-optic transmission a fibre-optic converter is used inside the POLARIS and it converts the Ethernet/IP to fibre-optic signals (Ethernet/IP Ex e connection is not required). For transmission a converter of the same type is needed for the non-hazardous area. -
Page 49: Emc (Electromagnetic Compatibility)
POLARIS BASIC - for Zone 1 / 21 Commissioning POLARIS Panel PCs 5.7" / 10.4" / 12.1" 6.10 EMC (Electromagnetic Compatibility) This is a class A unit and can cause radio interference in residential areas; if it does, the owner/managing operator may be required to implement suitable measures and pay for loss or damage. -
Page 50: Back-Up Fuse
We recommend that the POLARIS is secured with a back-up fuse to avoid triggering the internal fuse in the device. The internal fuse can only be replaced by BARTEC. Back-up fuse AC: 1.6 A slow-blowing (since June 2015: 2.5 A) DC: 4 A quick-blowing. -
Page 51: Shielding
POLARIS BASIC - for Zone 1 / 21 Commissioning POLARIS Panel PCs 5.7" / 10.4" / 12.1" 6.10.4 Shielding Only cables with braided shielding should be used – (recommended cover density > 80%). Sheet shielding should not be used. – Generally, connection of the shielding at both ends results in optimum damping of –... -
Page 52: Ethernet
POLARIS PROFESSIONAL- for Zone 2/22 Commissioning POLARIS Panel PC Professional 10,4” / 12,1” / 12,1” W Single-sided shield connection on the connecting cables: Illustration 13: Example of single-sided shield connection Connection of the shielding at one end only is recommended when there is inadequate equipotential bonding, or none at all. -
Page 53: Commissioning
POLARIS BASIC - for Zone 1 / 21 Commissioning POLARIS Panel PCs 5.7" / 10.4" / 12.1" Commissioning For electrical systems the relevant installation and operating specifications (e.g. Directives 2014/34/EU, BetrSichV and the applicable national ordinances, IEC 60 079-14 and the DIN VDE 0100 series) must be observed. -
Page 54: Operation
POLARIS PROFESSIONAL- for Zone 2/22 Operation POLARIS Panel PC Professional 10,4” / 12,1” / 12,1” W Operation The device can be put into operation after the final check has been made. The POLARIS series does not have any ON/OFF switch. Operating System The POLARIS series devices have the Windows 7 Embedded MUI or the Windows 7 Ultimate operating system pre-installed. -
Page 55: Windows 7 Ultimate
The Bartec HMI Polaris Smart devices are equipped with an On-Board-Recovery solution. The Bartec Recovery is a software package preloaded on the devices which serves the disregard of the device in the work state. In case of a mistake every device can be booted up in the Recovery mode to move afterwards the operating system into the work state. -
Page 56: Recovery Surroundings
POLARIS PROFESSIONAL- for Zone 2/22 Operation POLARIS Panel PC Professional 10,4” / 12,1” / 12,1” W The hidden partition is approx. 10 GB. That's why the available storage space on the hard disk is lower than the given capacity. 8.3.3 Recovery surroundings The Recovery mode bases on a slender Windows operating system or so-called PE surroundings (Windows Preinstallation Environment). -
Page 57: Recovery Application
POLARIS PROFESSIONAL- for Zone 2/22 Operation POLARIS Panel PC Professional 10,4” / 12,1” / 12,1” W As soon as the surroundings are completely loaded and are ready for use, the Recovery engine will check in the background whether the applications necessary for the device, tools and drivers exist. -
Page 58: Restoration In The Work State
POLARIS PROFESSIONAL- for Zone 2/22 Operation POLARIS Panel PC Professional 10,4” / 12,1” / 12,1” W To accept the licence terms, the option "I accept the terms in the End User License Agreement" must be activated or be selected. The button "Start Recovery" is released enclosed. - Page 59 POLARIS PROFESSIONAL- for Zone 2/22 Operation POLARIS Panel PC Professional 10,4” / 12,1” / 12,1” W ATTENTION With starting the restoration of the operating system in the work state all data on the operating system partition get lost! Contents and format of all other partitions on the hard disk are preserved consistently.
-
Page 60: Finish The Recovery
POLARIS PROFESSIONAL- for Zone 2/22 Operation POLARIS Panel PC Professional 10,4” / 12,1” / 12,1” W Illustration 8: Prepare the partition After preparing the partition all files from the effigy image stored on the Recovery partition are unpacked and transferred on the operating system partition. Illustration 9: Transferred by system files on operating system partition Transferring of system files is the last process with the Widerherstellung of the operating... -
Page 61: Recovery/Backup Function
Recovery/Backup Function The POLARIS can be restored to delivery status by means of a recovery stick. The recovery flash drive is not included in the scope of supply. If necessary, contact the following contact address: support-polaris@bartec.de 8.4.1 Recovery-Stick Image The recovery stick image for the POLARIS Panel PC can be found on the POLARIS type label. -
Page 62: Backup
POLARIS PROFESSIONAL- for Zone 2/22 Operation POLARIS Panel PC Professional 10,4” / 12,1” / 12,1” W 8.4.2 Backup We expressly point out that it is the user’s responsibility to make a backup of the POLARIS and all its functions! We expressly recommend that such a backup of the POLARIS be saved on an external storage medium (USB stick [recovery stick], CD, DVD or suchlike) and/or in the company network! 8.4.3... -
Page 63: Network (Ethernet) Setup
POLARIS PROFESSIONAL- for Zone 2/22 Operation POLARIS Panel PC Professional 10,4” / 12,1” / 12,1” W Network (Ethernet) Setup Requirements Network (Ethernet) setup: Physical connection (connection of Ethernet cable to a network). Go to Start Control panel <double click>. –... - Page 64 POLARIS PROFESSIONAL- for Zone 2/22 Operation POLARIS Panel PC Professional 10,4” / 12,1” / 12,1” W To select the function Internet Protocol click (figure 1) on sub item "Properties" – With a < double click > on Internet Protocol (figure 2) the function is started. –...
-
Page 65: Keyboard Settings
POLARIS PROFESSIONAL- for Zone 2/22 Operation POLARIS Panel PC Professional 10,4” / 12,1” / 12,1” W Keyboard Settings Keyboard customization to suit the respective application This is not necessary with the BMS Graf pro visualisation software. The use of software from other sources must be checked in each individual case. -
Page 66: Touch Screen
Computer- button Scroll-Lock Scroll-Lock Scroll-Lock Scroll-Lock Touch Screen In the POLARIS with touch screen, the touch screen software is pre-installed already. The touch screen software is available for download under http:// automation.bartec.de/ Technical data subject to change. EN 58/65 09/2020... -
Page 67: Faults And Troubleshooting
POLARIS PROFESSIONAL- for Zone 2/22 Faults and troubleshooting POLARIS Panel PC Professional 10,4” / 12,1” / 12,1” W Faults and troubleshooting Fault Possible cause Remedy No power supply present Check connection of the power supply External back-up fuse has Check fuse tripped Internal fuse has tripped Return to the manufacturer... -
Page 68: Maintenance, Inspection, Repair
Maintenance, inspection, POLARIS PROFESSIONAL- for Zone 2/22 repair POLARIS Panel PC Professional 10,4” / 12,1” / 12,1” W Maintenance, inspection, repair Only trained and qualified personnel may commission and do maintenance work on the POLARIS! Trained qualified personnel are people who are familiar with the installation, assembly, commissioning and operation of the POLARIS, have been instructed about the risks and have the appropriate qualifications by virtue of the work they do. -
Page 69: 10.3.1 Instructions For Repairs
If you wish to send in a defective device for repair, please read the RMA procedure guidance first. Then fill in and sign the RMA (Return Merchandise Authorisation) form and send it to our "Retouren Center". E-Mail: services@bartec.de Fax: +49 7931 597-119 We cannot guarantee any contractually agreed processing times for devices that are sent in without an RMA number. -
Page 70: Accessories, Spare Parts
POLARIS PROFESSIONAL - for Zone 2/22 Accessories, spare parts POLARIS Panel PC Professional 10,4” / 12,1” / 12,1” W Accessories, spare parts Included in the scope of the delivery: Name Order no. POLARIS Panel PC with pre-installed operating system Driver for Mainboard and Touch Mounting clamps Reinforcement frame POLARIS 10.4"... -
Page 71: Order Numbers
POLARIS PROFESSIONAL - for Zone 2/22 Order numbers POLARIS Panel PC Professional 10,4” / 12,1” / 12,1” W Order numbers Technical data subject to change. EN 63/65 09/2020... - Page 72 POLARIS PROFESSIONAL - for Zone 1 / 21 Additional information POLARIS Panel PC Professional 10,4” / 12,1” / 12,1” W Additional information Technical data subject to change. EN 64/65 09/2020...
- Page 73 POLARIS PROFESSIONAL - for Zone 1 / 21 Declaration of conformity POLARIS Panel PC Professional 10,4” / 12,1” / 12,1” W 16. Declaration of conformity All certification see www.bartec.de Technical data subject to change. EN 65/65 09/2020...
Need help?
Do you have a question about the POLARIS B7-72V1 Series and is the answer not in the manual?
Questions and answers