Maintenance, Inspection, Repair; Maintenance Intervals; Inspection; Maintenance And Repair Work - Bartec POLARIS PROFESSIONAL B7-72V1 Series User Manual

Hide thumbs Also See for POLARIS PROFESSIONAL B7-72V1 Series:
Table of Contents

Advertisement

POLARIS PROFESSIONAL
POLARIS Panel PC Professional 15" up to 24"
9.

Maintenance, Inspection, Repair

9.1

Maintenance intervals

9.2

Inspection

9.3

Maintenance and Repair Work

Technical data subject to change without notice.
08/2019
- for Zone 2 / 22
Only trained and qualified personnel may commission and do maintenance work on the
POLARIS! Trained qualified personnel are people who are familiar with the installation,
assembly, commissioning and operation of the POLARIS, have been instructed about the
risks and have the appropriate qualifications by virtue of the work they do.
The mechanical status of the devices should be checked at regular intervals. The length of
the maintenance intervals depends on the ambient conditions. We recommend checking at
least once a year. Regular maintenance is not necessary if operated appropriately in
conformance with the installation instructions and with due consideration to the ambient
conditions.
DANGER
Prevent electrostatic charging in hazardous (potentially explosive) areas.
There is a risk of a fatal injury in an explosive atmosphere!
Take devices out of hazardous areas before wiping them dry or cleaning them!
ATTENTION
There is a risk of condensation forming when installed outside. Damage to
property may occur if this is not checked!
Regularly check the POLARIS for the formation of condensation.
Under EN 60079-17, EN 60079-19, IEC 60079-17 and IEC 60079-19, the owner/ managing
operator of electrical installations in hazardous areas is obliged to have these installations
checked by a qualified electrician to ensure that they are in a proper condition.
Adhere to the applicable regulations under Directive 99/92/EC, EN 60079-17,
EN 60079-19, IEC 60079-17 and IEC 60079-19 when servicing, doing maintenance work
on and testing associated operating equipment!
Assembly/disassembly, operating and maintenance work may be done only by trained
specialists. The statutory rules and other binding directives on workplace safety, accident
prevention and environmental protection must be observed.
Repair, Disposal,
Dispatch and Packaging
59/66

Advertisement

Table of Contents
loading

Table of Contents