Table of Contents
Advertisement
Basic
safety instructions
1.2
Handling the product
1.3
Intended use
EN 2/65
POLARIS
PROFESSIONAL- for Zone 2/22
POLARIS Panel PC Professional 10,4" / 12,1" / 12,1" W
ATTENTION
ATTENTION describes a possibly damaging situation. If not avoided, the plant or objects
in its vicinity may be damaged
Important information on effective, economical & environmentally compliant handling..
The original user manual with safety information is written in English. All other available
languages are translations of the original user manual.
The user manual is available in German and English. If further languages are required,
these must be requested from BARTEC or stated on placing an order.
BARTEC reserves the right to change the content of this document without notification. No
warranty is assumed for the correctness of the information. In cases of doubt, the German
safety instructions apply because it is not possible to rule out errors of translation or printing.
In the case of legal disputes, the "General Terms and Conditions of Business" of the
BARTEC GmbH also apply.
The current versions of the datasheets, operating instructions, certificates and EU
declarations of conformity can be downloaded from
directly from BARTEC GmbH.
The product described in these operating instructions has been tested and left the factory
in perfect condition as regards meeting safety requirements. To maintain this condition and
ensure that this product operates perfectly and safely, it may be used only in the manner
described by the manufacturer. Appropriate transportation, suitable storage and careful
operation are also essential for the perfect and safe operation of this product. The POLARIS
must be installed properly and securely if it is to work perfectly and correctly.
The safe and perfect mounting of the POLARIS is a precondition for faultless and correct
operation.
It is used exclusively in combination with operating devices which satisfy the requirements
for Overvoltage Category I.
The POLARIS PROFESSIONAL Panel PCs have been designed specially for use in
hazardous (potentially explosive) areas in Zone 1 or Zones 21.
It is essential to observe the permissible operational data for the device being used.
1.1.1
1.1.2
Changes in the document
or may be requested
www.bartec.de
1.3.1
Exclusive purpose
Technical data subject to change.
Languages
09/2020
Advertisement
Table of Contents
