Recovery/Backup Function; Recovery-Stick Image - Bartec POLARIS PROFESSIONAL B7-72V1 Series User Manual

Hide thumbs Also See for POLARIS PROFESSIONAL B7-72V1 Series:
Table of Contents

Advertisement

Operation
7.4

Recovery/Backup Function

7.4.1

Recovery-Stick Image

54/66
POLARIS PROFESSIONAL
POLARIS Panel PC Professional 15" up to 24"
Illustration 25:
Successful closure of the recovery process
After the new start of the device the operating system partition is active again and this
restored operating system is begun.
The first start (so called: Ridge time boat) of the put back operating system can last some
minutes. On this occasion, it is about two phases. During the first phase components of
the device are recognised the hardware and are integrated into the operating system.
During the second phase the final settings are put. Between the phases or within the
phase the device is automatically restarted several times.
The POLARIS can be restored to delivery status by means of a BARTEC recovery stick.
The BARTEC recovery stick is not included in the scope of supply.
It can be ordered from the contact address
The recovery stick image for the POLARIS Panel PC can be found on the POLARIS type
label.
- for Zone 2 / 22
support-polaris@bartec.de
Technical data subject to change without notice..
Addition
e. g. Built 384
08/2019

Advertisement

Table of Contents
loading

Table of Contents