Table of Contents
Advertisement
POLARIS PROFESSIONAL
POLARIS Panel PC Professional 15" up to 24"
1.4
Owner's/Managing Operator's Obligations
1.5
Safety Instructions
1.5.1
General Safety Instructions
1.6
Safety Instructions for Operation
1.6.1
Upkeep
1.6.2
Maintenance
Technical data subject to change without notice.
08/2019
- for Zone 2 / 22
The owner/managing operator undertakes to restrict permission to work with the POLARIS
to people who:
are familiar with the basic regulations on safety and accident prevention and have
been instructed in the use of the POLARIS;
have read and understood the documentation, the chapter on safety and the
warnings.
The owner/managing operator must check that the safety regulations and accident
prevention rules valid for the respective application are being observed.
Take the device out of the hazardous area before wiping it with a dry cloth or cleaning
it!
Do not open devices in a hazardous area.
The general statutory regulations or directives relating to safety at work, accident
prevention and environmental protection legislation must be observed, e.g. the
German industrial health and safety ordinance (BetrSichV) or the applicable national
ordinances.
In view of the risk of dangerous electrostatic charging, wear appropriate clothing and
footwear.
Avoid the influence of heat that is higher or lower than the specified temperature
range.
Protect the device from external influences! Do not expose the device to any
caustic/aggressive liquids, vapours or mist! In the event of malfunctioning or damage
to the enclosure, take the device out of the potentially explosive area immediately
and bring it to a safe place.
For electrical systems the relevant installation and operating regulations must be complied
with (e.g. Directive 99/92/EC, Directive 94/9/EC and the national applicable ordinances, EN
60079-14, IEC 60079-14, and the DIN VDE 0100 series)!
The disposal of this equipment must comply with the national regulations on the disposal of
waste.
Regular servicing is not necessary if the equipment is operated correctly in accordance with
the installation instructions and environmental conditions. In this context, please refer to
Chapter "Maintenance, Inspection, Repair".
Basic
Safety Instructions
3/66
Advertisement
Table of Contents
