Ethernet Terminal Assignment; Rs422 Interface - Bartec POLARIS PROFESSIONAL B7-72V1 Series User Manual

Installation
5.6.3

Ethernet terminal assignment

5.6.4

RS422 interface

32/66
POLARIS PROFESSIONAL
POLARIS Panel PC Professional 15" up to 24"
Configuration Ethernet
Terminal Interface
X13 Ethernet
X14 Ethernet
X15 Ethernet
X16 Ethernet
Assignment RJ45 plug for Ethernet to POLARIS Panel PC terminal block
Configuration RS422
Terminal Interface
X17 Termination
X18 On/Off
X19 Interface COM 1
X20 Interface COM 1
X21 Interface COM 1
X22 Interface COM 1
Connection PLC with RS422 interface to POLARIS.
Maximum length of the data line 1,000 m.
- for Zone 2 / 22
Signal Remarks
RxD + 10BaseT Receive
RxD - 10BaseT Receive
TxD + 10BaseT Transmit
TxD - 10BaseT Transmit
Connection RJ45
PIN 1
PIN
1
2
PIN 8
3
4
5
6
7
8
Signal Remarks
Jumper between terminal X17 and
X18 for activation of the terminator
resistors
TxD B (TxD+) Transmission cable
TxD A (TxD-) Transmission cableI
RxD B (RxD+) Receiving cable
RxD A (RxD-) Receiving cable
Technical data subject to change without notice..
positive
negative
positive
negative
POLARIS
Signal Terminal
TX+ X13
TX- X14
RX+ X15
not used
not used
RX- X16
not used
not used
Input
Input
Input
Input
08/2019