Terminal Compartments X1; Cable Entries; Supply Voltage Terminal Assignment); Ethernet Terminal Assigment - Bartec POLARIS B7-72V1 Series User Manual

Commissioning
6.6

Terminal compartments X1

EN 30/65
POLARIS PROFESSIONAL- for Zone 2/22
POLARIS Panel PC Professional 10,4" / 12,1" / 12,1" W
When connecting cables and leads to supplies / communications equipment in increased
safety protected areas, Ex certified cable entries must be used which are suitable for each
type of cable and lead. You must maintain the protection concept "e" and include a suitable
sealing element so that an IP rating of at least IP 54 is maintained.
DANGER
Do not connect cables and leads when the power supply is active.
Danger to life exists in an explosive atmosphere!
Disconnect the device before starting work.
Only use certified cable glands that have been approved for the cable diameter of
the connection cable.
Unused cable glands must be sealed using an approved blanking plug.
Mains Connection Variant DC 24 V
Terminal Interface
X10 Supply
X11 Supply
X12 Supply
Configuration Ethernet 10BaseT
Terminal Interface
X13 Ethernet
X14 Ethernet
X15 Ethernet
X16 Ethernet
6.6.2

Supply voltage terminal assignment)

Signal Remarks
+ DC 24 V ± 10 %
- 0 Volt
PE Protective earth
6.6.3
Signal Remarks
RxD + 100/10 BaseT Receive
RxD - 100/10 BaseT Receive
TxD + 100/10 BaseT Transmit
TxD - 100/10 BaseT Transmit
6.6.1

Cable entries

Ethernet Terminal Assigment

positive
negative
positive
negative
Technical data subject to change.
09/2020