Sample Port With Electrodes; Type Plate - SYSMEX CyFlow Cube 6 V2m Operating Manual

Table of Contents

3.2.4 Sample port with electrodes

The Sample port is located on the right side of the device.

The Sample port holds the Sample tube during the measurement. The start and stop

electrodes of the Sample port allow the independent determination of exactly 200 μl

volume for each sample. The method of True Volumetric Absolute Counting (TVAC)

supported by CyFlow™ Cube systems is based on the precise measurement of a fixed

sample volume.

The type plate is attached to the rear side of the device.

The content of the type plate varies according to the system configuration. The system

configuration is represented by an addition to the REF number (e.g. CY-S-3061R-V2m).

Item

Manufacturer

accompanied by the name and the address of the manufacturer

Manufacturing Date

Serial Number

Reference Number

CE mark

Waste of Electrical and Electronic Equipment

Consult Instructions For Use

CyFlow™ Cube 6 V2m | Operating Manual | February 2020

Figure 5: Type plate

Table 6: Signs on the type plate of the device.

3 Overview

Table of Contents