Table of Contents
Advertisement
1 Introduction
Bold
Underlined
1.3 General conditions
Ensure that the following conditions are met when working with the device:
•
This Operating Manual must be read prior to using the device.
•
Report any recurring faults or problems to your local Sysmex representative.
Sysmex Partec GmbH does not accept liability for any damage or personal injury arising
from:
•
Unauthorised modifications or manipulation of the device;
•
Improper use;
•
Use of non-approved accessories;
•
Improper handling;
•
Non-compliance with this Operating Manual.
Not following these conditions will impair the safe use of the device, its components and
the safety of the user.
Sysmex Partec GmbH regulates the intended purpose of its products in the instructions
for use. The manufacturer assumes no responsibility for any application deviating from
the instructions for use stated in the product documentation (Off Label Use). We
expressly emphasize that in the event of use contrary to the intended purpose the liability
rests solely with the user.
1.4 CE compliance
The device is marked with a CE mark of conformity, which confirms the
compliance with the essential requirements of the following European
Directives:
•
2014/35/EC on electrical equipment designed for use within certain
voltage limits;
•
2014/30/EC on electromagnetic compatibility
10
Terms and Conditions of Sale and
Delivery" [...]
Describes headlines of subtopics, which
need no independent chapter.
Example: Qualified personnel
Describes also specially highlighted
keywords.
Example: Names the source of the
hazard
References external hyperlinks.
Example: www.sysmex-partec.com
CyFlow™ Cube 6 V2m | Operating Manual | February 2020
Advertisement
Table of Contents
