Technical Data; Environmental Conditions; Device - SYSMEX CyFlow Cube 6 V2m Operating Manual

Table of Contents

Advertisement

10 Technical data

10 Technical data
INFORMATION
This equipment has been tested and found to comply with the limits for a
Class A digital device, pursuant to part 15 of the FCC Rules. It has also
been tested and found to comply with the CE directive for Electomagnetic
Compatibility.
These limits are designed to provide reasonable protection against
harmful interference when the equipment is operated in a commercial
environment. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions for use, may cause harmful interference to radio
communications. Operation of this equipment in a residential area is
likely to cause harmful interference in which case the user will be
required to correct the interference at his own expense.

10.1 Environmental conditions

Item
Temperature
Relative humidity
Other
Max. altitude

10.2 Device

Item
Dimensions
Weight
Power
Mains fuse
Installation / overvoltage
category
40
Specification
Storage and transport:
Operation:
20% to 85% relative, non-condensing
no vibrations, no direct sunlight, no direct heat, no smoke,
no dust
2000 m above MSL
Specification
Length:
385 mm
Width:
280 mm
Height:
290 mm
528 mm with open display
18 kg
100-240 V AC
50/60 Hz
120 VA
T 3.15 A 250 V
2 / II
CyFlow™ Cube 6 V2m | Operating Manual | February 2020
5 °C to 50 °C
15 °C to 30 °C

Advertisement

Table of Contents
loading

Table of Contents