Electrical Hazards; Alterations To The Device - SYSMEX CyFlow Cube 6 V2m Operating Manual

Table of Contents

Only authorised service personnel is allowed to open the housing of the

device.

Laser light of laser class IIIb can be emitted if the housing of the device is

damaged or the laser protection is removed. Serious injuries of the eyes

and the skin are the results of emission by laser light of class IIIb lasers.

2.10 Electrical hazards

The main electrical source used must be grounded or earthed due to local

specifications. The mains cable carries out the protective earthing. Please

place the device in such a way that the electrical power cord can easily be

unplugged. Removable power cords should not be replaced by inadequate

wiring.

Beware of possible voltage when changing the fuse (T 3.15 A 250 V).

Unauthorised alterations to the device can result in risks and hazards. Therefore, unless

expressly permitted by the manufacturer, no alterations may be made to the device.

If the device is altered, appropriate tests and trials must be performed to ensure the

continued safe use of the device.

CyFlow™ Cube 6 V2m | Operating Manual | February 2020

2 Safety

Table of Contents