SYSMEX CyFlow Cube 6 V2m Operating Manual page 55

Procedure
1. Move the cursor into the dot plot and right-click.
2. Select [Create Quadrants].
Edit quadrant region
Move the cursor into the plot and keep the left mouse button pressed to adjust quadrants.
Approach individual points with the cursor and keep the left mouse button pressed to
create asymetric quadrants.
Creating vertical or horizontal Regions
INFORMATION
Horizontal Regions are only available within dot plots.
Procedure
1. Move the cursor into the histogram / Dot Plot and right-click.
2. Select [Create vertical Regions] or [Create horizontal Regions].
CyFlow™ Cube 6 V2m | Operating Manual | February 2020
Figure 23: Creating a quadrant region
Figure 24: Creating a vertical Region
11 Software
55