Triple-Tiller Airy 2,5m – 4m 20-01-2020 EC- Declaration of Conformity in accordance with the EU Machinery Directive 2006/42/EC applicable as from December 29 2009: HE-VA ApS N. A. Christensensvej 34, DK-7900 Nykøbing Mors hereby confirms that the following machine has been manufactured in accordance with the Council Directive 2006/42/EC.
Range of application HE-VA Triple-Tiller Airy stubble harrow is available in 2,5m - 3,0m - 3,5m and 4,0m working width. All models are rigid and lift-mounted with a row spacing of only 25 cm. The 3 rows of tines are mounted at a height of 85 cm and with 70 cm interval.
Triple-Tiller Airy 2,5m – 4m 20-01-2020 Delivery check Preparation of the machine Check: • the machine for any damages. • for transport damage to the paint. • hydraulic hoses for cuts and other damage. Check that none of the other hydraulics components were damages during transport.
Triple-Tiller Airy 2,5m – 4m 20-01-2020 Safety instructions Do not start-up the machine if there are persons in exposed positions** within a hazardous area*. When persons are in exposed positions (e.g. in connection with adjustment, maintenance, attachment and uncoupling), the following conditions must be observed: The machine must be lowered to firm ground.
Triple-Tiller Airy 2,5m – 4m 20-01-2020 Transport on public roads: Check before transport on public roads that the attachment of the machine at the tractor is in accordance with the local rules and regulations in force (permitted total weight, permitted axle load, transport width, lights, warning signs, brakes etc.).
Triple-Tiller Airy 2,5m – 4m 20-01-2020 Labels on the machine There are several labels on the machine advising on safety precautions and practical use. Please study these instructions carefully, and make sure the operator are familiar with all labels and safety instructions.
Triple-Tiller Airy 2,5m – 4m 20-01-2020 Start-up General information Rigid models require 0 – 1 double-acting oil outlets (see technical specifications p. 5) Attachment (rigid lift-mounted machines) 1. Reverse the tractor to the machine and attach it. 2. Lift the machine to maximum transport height.
Triple-Tiller Airy 2,5m – 4m 20-01-2020 Maintenance • After the first 10 hours of operation, all bolts must be tightened • Check regularly that all bolts are tightened. • After the season all lubricating points must be lubricated, then wash and lubricate the machine. Do not use high-pressure water directly on ball bearings.