Contents Delivery Check ..............................4 Machine description............................4 Technical specifications ..........................5 Working with the Top-Strigle ......................... 5 Safety around the Top-Strigle......................... 6 Safety Instructions, regarding Hydraulic System ..................7 Markings on the machine ..........................8 Maintenance ..............................9 Disposal ................................10 Noter ................................
Page 4
EC DECLARATION OF CONFORMITY in accordance with the EU Machinery Directive 2006/42/EC applicable as from December 29 2009: HE-VA ApS N. A. Christensensvej 34, DK-7900 Nykøbing Mors hereby confirms that the following machine has been manufactured in accordance with the Council Directive 2006/42/EC.
UK Top-Strigle 3,0 – 4,0 – 5,0 – 6,0 – 7,0 – 8,0 - 9,0 - 10,0m 4 bars 22-01-2021 Delivery Check Check the Top-Strigle for any damage when it is received at either the dealer and the final customer. Check that the frame construction has not beeb exposed to impacts.
UK Top-Strigle 3,0 – 4,0 – 5,0 – 6,0 – 7,0 – 8,0 - 9,0 - 10,0m 4 bars 22-01-2021 Safety around the Top-Strigle Do not operate the machine, if any people** are at risk in the dangerous area.* When persons are at risk in the dangerous area (e.g. when doing adjustments, maintenance or connect or disconnecting), the following points must be met: •...
UK Top-Strigle 3,0 – 4,0 – 5,0 – 6,0 – 7,0 – 8,0 - 9,0 - 10,0m 4 bars 22-01-2021 Safety Instructions, regarding Hydraulic System • The highest allowable pressure, is 225 bar. • It is recommended to mark the hydraulic connections between the implement and tractor, to avoid incorrect operation! •...
UK Top-Strigle 3,0 – 4,0 – 5,0 – 6,0 – 7,0 – 8,0 - 9,0 - 10,0m 4 bars 22-01-2021 Markings on the machine Several markings are located at your machine, which contains safety regulations and other instructions to inform about correct operating. Please read these instructions carefully, and make the driver aware about the markings and safety regulations in this Operating Instructions.
UK Top-Strigle 3,0 – 4,0 – 5,0 – 6,0 – 7,0 – 8,0 - 9,0 - 10,0m 4 bars 22-01-2021 Maintenance After 10 hours of operation, tightening of wheels, bearings and stop rings must be done. If this is not respected our warranty will lapse.
UK Top-Strigle 3,0 – 4,0 – 5,0 – 6,0 – 7,0 – 8,0 - 9,0 - 10,0m 4 bars 22-01-2021 Disposal When, after many years of use, the machine is to be regarded as end-of-life, it must be disposed of to a registered and approved product dealer.
UK Top-Strigle 3,0 – 4,0 – 5,0 – 6,0 – 7,0 – 8,0 - 9,0 - 10,0m 4 bars 22-01-2021 Spare parts list For models before chassis number: 538020 Right wing w/Ø12 mm tines Back to the table of contents...
Page 13
UK Top-Strigle 3,0 – 4,0 – 5,0 – 6,0 – 7,0 – 8,0 - 9,0 - 10,0m 4 bars 22-01-2021 Pos. Part no. Description 675172005 Left section, welded 675172010 Right section, welded 675172505 Left section, welded 675172510 Right section, welded 675172705 Left section, welded 675172710 Right section, welded...
Page 14
UK Top-Strigle 3,0 – 4,0 – 5,0 – 6,0 – 7,0 – 8,0 - 9,0 - 10,0m 4 bars 22-01-2021 675174525 Bar 1 left, 50x50x3050 675174526 Bar 2 left, 50x50x3050 675174527 Bar 3 left, 50x50x3050 675174528 Bar 4 left, 50x50x3050 675174721 Bar 1 right, 50x50x3550 675174722 Bar 2 right, 50x50x3550 675174723 Bar 3 right, 50x50x3550...
UK Top-Strigle 3,0 – 4,0 – 5,0 – 6,0 – 7,0 – 8,0 - 9,0 - 10,0m 4 bars 22-01-2021 For models after chassis number: 538020 Right wing with Ø12 mm tine Back to the table of contents...
Page 17
UK Top-Strigle 3,0 – 4,0 – 5,0 – 6,0 – 7,0 – 8,0 - 9,0 - 10,0m 4 bars 22-01-2021 Pos. Part no. Description 1275939 Left wing, welded 1275940 Right wing, welded 1275409 Left wing, welded 1275410 Right wing, welded 1275199 Left wing, welded 1275201...
UK Top-Strigle 3,0 – 4,0 – 5,0 – 6,0 – 7,0 – 8,0 - 9,0 - 10,0m 4 bars 22-01-2021 1275405 Bar 50x50x3050, right 1 1275406 Bar 50x50x3050, right 2 1275407 Bar 50x50x3050, right 3 1275408 Bar 50x50x3050, right 4 1275387 Bar 50x50x3550, left 1 1275388...
UK Top-Strigle 3,0 – 4,0 – 5,0 – 6,0 – 7,0 – 8,0 - 9,0 - 10,0m 4 bars 22-01-2021 Left wing w/Ø16 mm tine 5,0 – 6,0 – 7,0 – 8,0 m Back to the table of contents...
Page 21
UK Top-Strigle 3,0 – 4,0 – 5,0 – 6,0 – 7,0 – 8,0 - 9,0 - 10,0m 4 bars 22-01-2021 Pos. Part no. Description 1275939 Left wing, welded 1275940 Right wing, welded 1275409 Left wing, welded 1275410 Right wing, welded 1275199 Left wing, welded 1275201...
Page 22
UK Top-Strigle 3,0 – 4,0 – 5,0 – 6,0 – 7,0 – 8,0 - 9,0 - 10,0m 4 bars 22-01-2021 1275366 Holder for bar 1275931 Bar 70x70x2550, left 1 1275935 Bar 70x70x2550, right 1 1275932 Bar 2 - 3 - 4, L+R 70x70x2550 1275452 Bar 70x70x3050, left 1 1275453...