Delivery check .............................. 6 Machine description ............................ 6 Range of applications ..........................6 Technical specifications ..........................6 Safety instructions for Terra-Dan MKII ....................7 Safety and instructions on hydraulics ......................8 Transport on public roads .......................... 8 Labels on the machine ..........................9 Start-up of the machine ..........................
Terra-Dan MKII 24-04-2018 EC-Declaration of Conformity in accordance with the EU Machinery Directive 2006/42/EC applicable as from December 29th 2009: HE-VA ApS N. A. Christensensvej 34, DK-7900 Nykøbing Mors Denmark hereby confirms that the following machine has been manufactured in accordance with the Council Directive 2006/42/EC.
Terra-Dan MKII 24-04-2018 Delivery check Upon delivery to the dealer/supplier as well as to the customer, check the Terra-Dan MKII for possible damages. Machine description Range of applications HE-VA Terra-Dan MKII is a trailed seedbed harrow which is available in 4,0m, 5,0m, 6,0m and 7,5m working width.
Terra-Dan MKII 24-04-2018 Safety instructions for Terra-Dan MKII Do not start-up the machine if there are persons in exposed positions* within a hazardous area**. When persons are in exposed positions (e.g. in connection with adjustment, maintenance, attachment and uncoupling), the following conditions must be observed: 1.
Terra-Dan MKII 24-04-2018 Safety and instructions on hydraulics 1. The maximum working pressure is 225 bar. 2. It is advisable to label the attachment parts at hydraulic connections between the tractor and the tool in order to eliminate incorrect operation! 3.
Terra-Dan MKII 24-04-2018 Labels on the machine On your machine there are several labels containing both practical advice and safety precautions. Please be sure to read the labels and inform all those who operate the machine of the safety instructions in the manual.
Terra-Dan MKII 24-04-2018 Start-up of the machine General information Terra-Dan MKII lift-mounted requires 1 double-acting oil outlet. Terra-Dan MKII trailed requires 2 double-acting oil outlets. Attachment and uncoupling From transport to working position: 1. Raise the machine to maximum transport height.
The trailed Terra-Dan MKII has 36 lubrication points, and the lift-mounted model has 28. The typical lubrication points are located at spindles, wheel bearings and wing arms. All Terra-Dan MKII have to be lubricated after 8 working hours as well as after cleaning in order to press out any water and dirt.
Terra-Dan MKII 24-04-2018 Assembly instructions Assembling the drawbar and wheel support Mount the drawbar and its cylinder in the lowest holes of the three- point linkage. Mount the wheel support at the rear of the main frame, using the Ø50mm pin. Next, mount the wheel cylinder between the frame and the support.
24-04-2018 Instructions and adjustment of the harrow Attaching the harrow Attach the Terra-Dan MKII in the lift arms of the tractor. Connect hydraulic hoses. Adjusting the parallel operation of the harrow Fold out the harrow, and lower it to the ground. Make sure the working depth is even on all the tine bars by comparing the end plates.