Safety Around The Top-Cutter Solo - HE-VA Top-Cutter Solo Single Operating Instructions, Spare Parts List, Declaration Of Conformity

Do not operate the machine, if any people
When persons are at risk in the dangerous area (e.g. when doing adjustments, maintenance or
connect or disconnecting), the following points must be met:
• Lower the machine on solid ground.
• Hydraulics must be relieved.
• Tractor must be turned off, and the key removed.
• Driver must be aware, when operating that there is no persons at risk in the dangerous area.
• When replacing knifes, it is not aloud to work underneath the machine without any rigid
support which are approved for the purpose. As an alternative the machine can be tilt around
to stand on the A-frame and fixed in this position.
Most accidents when operating the machine, transporting and doing maintenance occurs, when
avoiding the most simple safety regulations.
For this reason, it is of highest importance, that any person who is operating the machine, strictly
follows the safety regulations and other instructions, which belongs the machine.
The machine must only be operated, maintained and fixed by persons, who is confident with and
skilled for this work and is aware of moments of danger, which can occur.
ATTENTION!! Rotating parts and clothes in a loose condition, is a dangerous combination.
IMPORTANT!! It is strictly prohibited for any person to stand on the frame or chassis
of the machine, when it is either operating or the tractor is idling.
Instructions for transport on public roads:
Before transport on public roads, make sure that the attachment of the implement to the tractor, is in
accordance with the local rules and regulations in force (permitted total weight, permitted axle load,
transport width, lights and warning signs).
Front axle load
:
When the implement is attached and at maximum load, the tractors driving properties must be
ensured. Check that the front axle is sufficiently loaded. The front axle load must be at least 20% of
the tractors weight. Permitted axle load and total weight for the tractor must be respected.
NB! The driving, controlling and braking properties are affected by the attached implement.
1
People at risk: Any person, who is completely or partially in the dangerous area.
2
Dangerous area: At the machine and underneath it, and in a distance of 4 m from it.

Safety around the Top-Cutter Solo

1
are at risk in the dangerous area.
2