Safety - Taylor 810 Series Original Service Instructions

INTRODUCTION

Safety

We at Taylor Company are deeply committed to
manufacturing safe operating and serviceable machines.
The many built-in safety features that are part of all
Taylor machines are aimed at protecting operators and
trained service technicians alike.
1
NOTICE! This manual is intended exclusively
for authorized Taylor service personnel.
NOTICE! DO NOT operate the machine before
reading the Operator's Manual. Failure to follow this
instruction may result in machine damage, poor machine
performance, health hazards, or personal injury.
IMPORTANT! In all areas of the world, the
machine should be installed in accordance with existing
local codes. Please contact your local authorities if you
have any questions.
Care should be taken to ensure that all basic safety
practices are followed during the installation and
servicing activities related to the installation and service
®
of Taylor machines.
• Only authorized Taylor service personnel should
perform installation, maintenance, and repairs
on Taylor machines.
• Authorized service personnel should consult
OSHA Standard 29CFRI910.147 or the
applicable code of the local area for the industry
standards on lockout/tagout procedures before
beginning any installation or repairs.
• Authorized service personnel must ensure that
the proper personal protective equipment (PPE)
is available and worn when required during
installation and service.
• Authorized service personnel must remove all
metal jewelry, rings, and watches before
working on electrical equipment.
1-2
lungs, and all parts of the body from potential harm when
using any chemical cleaner. Failure to follow this
instruction may result in a chemical burn.
up, operating, and cleaning the machine to avoid coming
in contact with hot grill surfaces or with hot grease.
Failure to comply may result in burn injuries.
grounded! DO NOT operate this machine unless it is
properly grounded and all service panels and access
doors are restrained with screws. Failure to do so can
result in severe personal injury from electrical shock!
•
than specified on the data label.
• DO NOT attempt any repairs unless the power
supply to the machine has been disconnected.
Failure to follow these instructions may result in severe
personal injury from electrical shock.
edges that can cause severe injuries.
installed in an area where a water jet or hose can be
used. NEVER use a water jet or hose to rinse or clean
this machine. Using a water jet or hose on or around this
equipment may result in the electrocution of the user or
damage to the equipment.
Model 810, 812, 820, 822, 828 Series
WARNING! Take caution to protect eyes,
CAUTION! Use extreme caution while setting
WARNING! This machine must be properly
WARNING! Avoid injury.
DO NOT operate the machine with larger fuses
WARNING! This machine has many sharp
WARNING! This machine must NOT be
Introduction