Taylor 810 Series Original Service Instructions page 41

Flat Menu Item Cook Cycle Screen
The following is an example of a Flat Menu Item Cook
Cycle Screen. The first line function default is REMOVE
IN.
Figure 2-22
To edit a menu item, press the cmenu Item key to bring
up a virtual keyboard. Press the Back key until all of the
characters are removed. Type in the desired name (up to
nine characters) and press the OK key to return to the
previous screen.
If the box is blank (creating a new item), type in the
desired name (up to nine characters). A maximum of two
lines of description can be used. Press the OK key to
return to the previous screen.
Figure 2-23
Controls and Systems
Flat Menu Item Timing Function
Up to four flat menu items can be cooked in one zone at
any time. Select any flat item from the menu screen and
press the STANDBY button once to initiate the 
count-down timer. The REMOVE IN time will display on
131085
the screen. Select the same or another flat menu item
and press the STANDBY button again to initiate the
second count-down timer. The display screen will then
change, showing the REMOVE IN time for both of the flat
menu items selected. Follow this same procedure for up
to four flat menu items to be displayed.
To Cancel a Flat Menu Item Timing Function
If only one flat menu item timing function is displayed,
131025
press the RAISE button. If two or more flat menu item
timing functions are displayed, press and hold your
finger on the Menu Item key to be canceled and press the
RAISE button at the same time.
Model 810, 812, 820, 822, 828 Series
CONTROLS AND SYSTEMS
Figure 2-24
Figure 2-25
2
131077
131079
2-11