Taylor 810 Series Original Service Instructions page 40

CONTROLS AND SYSTEMS
2. To raise the upper platen to the Open position to
resume cooking, press the RAISE button.
2
CAUTION! Never use force to raise the upper
platen. Damage to components may result. Only use the
RAISE button to open the upper platen.
One-Function Cook Cycle Screen
The following is an example of a One-Function Cook
Cycle Screen. The first line function default is REMOVE
IN.
Note: The Sec, Alarm, and Gap must be set.
2-10
Figure 2-18
Figure 2-19
Model 810, 812, 820, 822, 828 Series
Two-Function Cook Cycle Screen
The following is an example of a Two-Function Cook
14282
Cycle Screen. The two functions shown are TURN IN
and REMOVE IN.
The total cook time or REMOVE IN time is 100 seconds.
The first function is 60 seconds, and the second function
is 100 seconds. Each timing function is accumulative.
REMOVE IN is always the last part of the Cook cycle.
Three-Function Cook Cycle Screen
The following is an example of a Three-Function Cook
Cycle Screen. The three functions are SEAR IN, TURN
IN, and REMOVE IN.
The total cook time or REMOVE IN time is 120 seconds.
The first function is set at 30 seconds, the second
13987
function at 60 seconds, and the third function at 120
seconds. Each timing function is accumulative. REMOVE
IN is always the last part of the Cook cycle.
Figure 2-20
Figure 2-21
Controls and Systems
131080
131082