Taylor 810 Series Original Service Instructions page 35

Menu Parameters
To view the settings and actual temperatures for the
current item, press and hold the menu item key a
minimum of 5 seconds. The screen will display the cook
time, gap setting, temperature set points, and actual
temperature readings for each zone for that menu item.
Figure 2-6
If a key is not pressed for 20 seconds, the grill control will
return to the normal display. Pushing the EXIT key will
bring the display back to the main display page.
To View Software Versions
Press and release the Program key after 2 seconds to
view the software versions and menu item loaded onto
the control. The following items will be displayed:
Version: Current software version in the
display control
Menu: Current menu that is loaded into
the control
Motor Control Current software version in the
Version:
motor control board
Motor Control Current boot loader software
Boot Version:
version in the motor control board
Controls and Systems
131088
Program Mode
To enter the Program mode, the grill control must be in
the Off or Idle mode. Press and hold the PROGRAM key
for at least 5 seconds.
The control will display the password entry screen.
Using the keyboard displayed on the control, enter
operator password STORE1 and press the OK key.
Model 810, 812, 820, 822, 828 Series
CONTROLS AND SYSTEMS
Figure 2-7
Figure 2-8
131052
2
131074
2-5