Taylor 810 Series Original Service Instructions page 39

SERVICE CONTACT INFO. Key
The service provider inserts their contact information
(name, telephone number, and e-mail) on this screen.
Press the EXIT key to return to the previous page.
Figure 2-16
LANGUAGE Key
The LANGUAGE key is used to select the language the
control will display. The available languages are English,
French, Portuguese, Russian, and Spanish.
STANDBY ALERT - YES Key
Pressing this key toggles between YES and NO. If Yes is
selected, an alert will sound when the platen has not
been used for a Cook cycle or placed into the Standby
mode for a predetermined amount of time. See Standby
Alert Timer. If No is selected, the platen can still be
placed into the Standby position, but there will be no set
timing function associated with it.
Note: This function should be used to help conserve the
energy cost of running the grill during slow times.
VIEW HELP Key
The VIEW HELP key is not functional at this time (future
development).
Controls and Systems
STANDBY ALERT TIME Key
This is a programmable timer that can be set from 5:00
minutes to 60:00 minutes. After the selected time has
expired, an alert will sound and the screen will display
PUT INTO STANDBY. Once the Standby Alert has
131026
sounded, it will take three STANDBY button presses to
bring the platen down into the Standby position. The first
button press will clear the alert, and the next two presses
will actually bring the platen down into the Standby
position. Button presses should be done at approximately
1-second intervals.
Note: If the button presses are done too quickly, the
platen will come down and initiate a Cook cycle instead
of placing the platen into Standby mode. Pressing the
RAISE button will cancel the Cook cycle.
Standby Procedures
Whenever the grill is idle and product is not being
cooked, the upper platen should be placed in the Standby
position to conserve energy.
1. To place the upper platen in the Standby position
from the Open position, press the STANDBY button
twice, waiting 1 second between button presses.
The control will display GOING TO STANDBY and
then change to display STANDBY.
Note: If the Standby Alert mode is active and the
alarm is sounding, the STANDBY button must be
pressed three times, with a one-second pause
between presses. The first press cancels the alarm
and the next two presses lowers the upper platen into
the Standby position.
Model 810, 812, 820, 822, 828 Series
CONTROLS AND SYSTEMS
Figure 2-17
2
14283
2-9