DAYLIFF EXPRESS D1-1ph Installation & Operating Manual page 7

Express electronic pump controller
Table of Contents

Advertisement

This symbol corresponds to a possible risk of death or serious physical injury
or material damage. Take care.
CAUTION
Failure to observe the instructions in the presence of this symbol may lead to
malfunctions and damage to equipment, with possible consequent injuries
to the operator.
WARNING
Before performing any work on the electrical panel or system, shut off the
electrical power supply.
WARNING
The electrical panel must be connected by a qualified electrician in
observance of the relevant electrical standards.
WARNING
Before any other operation, ensure the installation is connected to an
efficient earthing system.
WARNING
After making the electrical connection, check that all electrical panel
settings are correct to ensure automatic start-up of the electric pump.
WARNING
Before performing any work on the electrical panel or system, shut off the
electrical power supply.
WARNING
On receipt of the goods, perform an inspection immediately to ensure that the equipment
has not been damaged during transport. If defects or missing material are found, the
client should promptly notify, and in any event within 5 days of receiving the goods, the
nearest Davis & Shirtliff retailer.
The Dayliff EXPRESS electrical panel must be used exclusively for the purpose and function
as specified in design. Any other application or use is to be considered improper and
therefore hazardous.
3

Advertisement

Table of Contents
loading

Table of Contents