Functions And Settings - DAYLIFF EXPRESS D1-1ph Installation & Operating Manual

4.2 Activation of load in manual mode
On start-up, the panel starts in automatic mode, as confirmed by the asterisk (*) displayed
alongside the text AUT on the display of each motor, or according to the previous status set
before shutdown.
The operating mode can be changed by pressing the UP arrow to change to Manual
mode, or the DOWN arrow to change to Automatic mode. Therefore, to enable
operation in Manual mode, press the UP arrow (the asterisk (*) is displayed alongside the
text MAN) and then press and hold OK.
The display then displays current absorption of the motor and the cos-phi power factor
values in real time. On release of the OK button, the motor is shut down.
In manual mode, the load is activated and bypasses all alarms,
but in the event of a fault the display ashes.
CAUTION

5. FUNCTIONS AND SETTINGS

The Dayliff EXPRESS panel features a host of internal functions.
There are basically 8 operating modes developed for various types of application as
described below.
5.1 FUNCTION 1 - Draining with oats/pressure switches
This operating mode is used for drainage applications using floats or pressure switches,
enabling the control of one or more pumps.
On selection of mode 1, all relative parameter fields for this function are enabled.
6