Ocm Troubleshooting Worksheet - Turner Designs TD-107 5.0 Operation Manual

Oil content monitor

Hide thumbs

Table Of Contents

Table of Contents

TD-107

The Troubleshooting Worksheet is designed to facilitate diagnostic data collection. After collecting

all data on the worksheet, most problems can be solved over the telephone. Refer to the Service

Assistance Section for the appropriate numbers.

Please fill out worksheet completely -- All entries are important

GENERAL INFORMATION:

Unit Serial No.:

(Tag is located on the left hand side of the instrument.)

Field Contact Name:

Field Contact Phone:

Description of Symptoms:

Date/Time Symptoms Started:

Describe Any Physical Damage To Unit:

Date Of Last Calibration:

(Press <ENT> from HOME screen to read last calibration date.)

THE HOME SCREEN READS:

If "ALM" is blinking, press

<ESC> and record alarms

PHYSICAL INSPECTION:

1. Is main power switch on?

2. Can LCD contrast be adjusted using the

UP/DOWN arrows?

3. Date flow-cell was last cleaned:

4. Turn main power to the instrument off and access power and signal

connections. Make sure all connections are tight.

APPENDIX G

5.0