Information Required For Repair; Transport; Repair - UCL SWIFT Swift K33A User Manual

WARRANTY PERIOD AND SERVICE

Information Required For Repair

Before sending the splicer to us,
t is necessary to contact UCLSWIFT Co., Ltd first.
� Give us following information by attaching paper
on the product. (Name, Department, Company,
Address, Contact information, FAX, E-MAIL)
� Product's serial number
� Product's state and problem incurred,
information on error message
� Product handling with disregard on working procedure
or directions written on instructions for use

Transport

The Swift K��A is high precision equipment,
so it is required to transport after keeping it in a safe case
to protect it from humidity, vibration and physical shock.
In case of request for repair, it must be in the case along with
its parts before its transport.

Repair

Any data saved in the memory including splice results
and splice modes may be deleted as a result of repair.
PRODUCT WARRANTY
SWIFT K��A
NAME OF PRODUCT
PRODUCTION NUMBER
DATE OF PURCHASE
CUSTOMER NAME
ADDRESS
Limited Warranty
�. This product is manufactured under strict quality management and inspection
processes �. UCLSWIFT Co., Ltd. warrants this product against defective materials
and workmanship for a period of one year from the date of purchase. However, this
warranty does not cover a damage or failure caused by or attributable to a reason
for Exclusion and Limitations even if the equipment is still under warranty
�. This warranty card has to be presented when the product is repaired
�. The arc fusion splicer is high precision equipment, so it is required to transport
after keeping it in an exclusive carrier case to protect it from humidity, vibration
and physical shock
Exclusion and Limitations
This warranty will not cover a damage or failure and charges (repairing charge +
part + travel expenses) will apply even if the equipment is still under warranty,
if such damage or failure has occurred due to or when �. Natural disaster
�. Applying over-voltage �. Customer's mishandling �. Customer's misuse without
following instructions or operation procedures provided by this user manual
�. The stamped seal is broken or damaged
When you require maintenance or repair service,
please contact the service center or the dealer you purchased the machine.
TEL.
��