Table of Contents
Advertisement
PRODUCT DESCRIPTION
Operation Procedure (Fiber Stripper)
* ���um Fiber
� Warm up the thermal stripper after applying
power to the control area. Open thermal stripper
cover and slide cover for preparation.
� Place fiber into the holder as shown above
pictures. The minimum stripping length should
be longer than ��mm.
� Mount the holder containing the fiber onto
the slider and close slide cover.
� Once the thermal stripper cover is closed,
the fiber is heated up for a pre defined time
and the coating is stripped by moving the slider.
� When stripping is completed, open the slide
cover and detach the holder containing the
stripped fiber. The slider part moves to the
initial position as therma stripper cover is opened.
Remove any remaining coating
residue from thermal stripper
and blade areas using a soft
brush for next operation.
Be careful in handling blade
part which is very sensitive.
��
Advertisement
Table of Contents
