MENU
SLEEVE HEATER
In normal operation mode, to call the heater
menu, press
. Then you can see the
MENU
heater menu as above.
There're already various heater mode and the
user can select for proper operation.
Also the heater mode will be stored up to ���.
Please note that the user can't use the Del and
Replace keys and use Edit key partially from
mode No � to No ��.
Choose the right mode for each sleeve tube
type and SOC. Otherwise sleeve tubes
do NOT shrink properly.
For the SOC, operators must use UCLSWIFT
standard products. Other company's sleeve
tubes may not shrink properly
Each heater mode heats up at different
section of the heater.
��