UCL SWIFT Swift K33A User Manual page 50

MENU
Limit on · It sets estimated loss value's error bound.
Estimated Loss · When estimated loss is higher than the
Value bound, error message is displayed.
Limit on Optical When the bending of � spliced optical
fibers exceeds the set bound, error
Fiber Angle
message is displayed.
Cleaning A short cleaning discharge is conducted to
Discharge Amount remove fine dust on optical fiber's surface
upon initial stage of optical fiber arrayal. It
sets intensity of cleaning discharge.
Cleaning Discharge It sets time for cleaning discharge.
Clearance · It sets location of optical fiber spliced at
Location the center of discharge.
· When MFD of both optical fibers differs, do the
sealing procedure through melting the smaller
MFD optical fiber more than the bigger MFD
optical fiber. To heat the smaller MFD optical
fiber more, splice loss can be lowered by moving
the clearance location toward the bigger MFD
optical fiber at the center of discharge.
Editable Editable
Non Editable Editable
Editable Editable
Editable Editable
Editable Editable
��