Table of Contents
Advertisement
PRODUCT DESCRIPTION
CLEAVER
The cleaver is designed to cleave the fiber
at a �� degree angle. For the best result,
following requirements should be met.
Be careful not to wet the equipment.
Maintain the unit in a clean condition at
all times because many of splicing problems
are caused by dust or moisture. Keep and use
the unit at room temperature as it could be
deformed by heat. Keep the equipment from
being shaken or physically impacted as it
could be broken.Never use organic solvent
such as acetone except alcohol to clean
rubber part of the equipment.
Cover
Clamp
Cleaver
<FRONT>
body
� The coating of fiber shall be cleanly stripped.
� The fiber shall be properly placed on the holder
upon cleaving.
� The physical condition and height of the cleaver
blade shall be adequately maintained.
Damper
Blade
Slider
<BOTTOM>
��
Advertisement
Table of Contents
