Table of Contents
Advertisement
PRODUCT DESCRIPTION
AUTO STRIPPER
Swift K��A automatic fiber stripper automatically
carries out an accurate stripping of the coating of
single- and multi-mode fibers. Featuring excellent
ensile force of fiber, the automatic stripper strips
up to ��.�mm in length without damaging the surface
of fiber. Read the user manual sufficiently to maintain
the best performance of the unit.
Be careful not to wet the equipment.
Maintain the unit in a clean condition at all
times because many of splicing problems
are caused by dust or moisture. Keep and
use the unit at room temperature as it
could be deformed by heat. Keep the
equipment from being shaken or physically
impacted as it could be broken.
Never use organic solvents such as
acetone except alcohol to clean rubber
part of the equipment.
Specification
No.
Subject
�
Applicable Fiber Diameter
�
Applicable Cable Diameter
�
Strip Length
�
Heating Time
�
Heat Temp. Range (HEATING TYPE)
�
Tensile Force after Stripping
Description
���μm
���μm, ���μm
Max ��.�mm
� ~ �� sec
�� °C ~ ��� °C
�kgf
��
Advertisement
Table of Contents
