Table of Contents
Advertisement
PRODUCT DESCRIPTION
Operation Procedure (Heating Sleeve)
Sleeve Procedure
� Apply power to the control panel and open
the cover of the heater to prepare.
� Set the sleeve tube to the area of arc-fused fiber
that needs to be reinforced and place the fiber inside
the heater. The connector type should be set to the
right-most position so that sleeve tube moves the
heater as closely as possible.
� Activate the heater after placing the fiber.
Cooling fan is run to cool the tube �� seconds after
heater activation.
� Open the cover when cooling is completed and
take out the reinforced fiber.
���um Fiber
���um Fiber
Splice-on-Connector
Cooling Tray
Splice-on-Connector
���um Fiber
���um Fiber
��
Advertisement
Table of Contents
