Table of Contents
Advertisement
MAINTENANCE OF SPLICE QUALITY
Blade Replacement
� In order to replace blade,
disassemble chip collector assembly
and rear pusher. Open the cover as
shown picture and press the pusher
pin to move slider to forward.
Rear Pusher
Pusher Pin
� Remove blade pin completely
using (-) driver.
� Remove old blade with blade gear
from body and replace new blade with
blade gear. In here reassembling
should be done in a reverse order of
disassembling. At this time, especially
be careful not to damage the blade.
Check the blade operating condition
with cleaver cover.
��
Advertisement
Table of Contents
