UCL SWIFT Swift K33A User Manual page 49

MENU
Editable Parameters In Mode
Set Value Description
Optical Fiber It displays the list of splice mode saved on
Type sealer data to facilitate selection of a proper
mode to use. Among splice modes saved on
database, it copies a similar splice mode to
use editing function.
Mode Title � Mode title � is to indicate splice mode
within �� letters at maximum.
Eccentricity When arraying optical fiber by using
Adjustment eccentricity adjustment function,
Function it sets offset ratio of axis.
Automatic The closer it is arrayed to the core center
Power with fewer errors , the quicker and better
-
the discharge is done.
Tensil Force It conducts tensile force test after splice.
Test
Cutting Angle · It sets cutting angle's error bound.
Limit · When either of cutting angles on both
optical fiber is outside the bound, error
message is displayed.
General Mode User Mode
Editable Editable
Editable Editable
Non Editable Editable
Non Editable Editable
Non Editable Editable
Editable Editable
��