UCL SWIFT Swift K33A User Manual page 38

MAINTENANCE OF SPLICE QUALITY
Electrode Replacement
� Turn the power off when replacing electrode.
� Turn the power on and conduct electrode stabilizing.
� Remove the electrode block and the electrode.
� Clean the electrode carefully using soft cotton swab
moistened with alcohol and then install it.
� Turn the power on and conduct electrode stabilizing.
It is recommended to replace electrode after
using �,��� times. If the actual number of arc
discharge exceeds the replacing cycle,
a message for electrode replacement is
displayed on the screen. Without electrode
replacement, splice loss increases and tensile
force at splicing point weakens.
��