Turn On The Swift K; Installing The Sleeve Loader - UCL SWIFT Swift K33A User Manual

OPERATION
TURN ON
THE SWIFT K��A
Press and hold for about �.� second without
opening the windshield cover. The initial screen is
displayed as above after resetting all their initial
functions. It is important to choose a right splice
and heat mode to ensure an accurate splicing result.
The current splice, heater and stripper mode are
displayed at the bottom of the initial page.
: same function with
MENU
: same function with
SET
: same function with
HEATER
: same function with
STRIPPER
MENU
SET
INSTALLING
THE SLEEVE LOADER
Get the sleeve loader installed as follows.
Install the cooling tray on the rear side of heater as above.
��