Table of Contents
Advertisement
PRODUCT DESCRIPTION
Maintenance
Replacement & Adjustment of Blade
� Remove worn out blade by unscrewing fixing
bolts as shown above picture. At this time, move
the slide part to the left hand side.
� Place new blades in the reverse manner of removing.
(Two blades as a pair at top and bottom)
Make sure that both blades fit tightly in place in
order to achieve a good strip result.
Handling and Storage
� Be careful of using, handling or storing principal
parts including blades, heater, etc as they are
closely related to the equipment's operation life.
� Do not apply unnecessarily weight or physical
impact in handling the equipment.
� Keep the principal parts of the equipment
in a clean condition always.
� Keep it clean and in a case when not using,
which will increase the life of the equipment.
��
Advertisement
Table of Contents
