Return To The Charging Station; Time Setting - Tesla RoboStar T80 Pro Manual

RETURN TO THE CHARGING STATION

After pressing the "1" button on the remote control or the "4" button on the vacuum cleaner, the
vacuum cleaner searches for the charging station and starts charging automatically.

TIME SETTING

In standby mode, press the center button on the top panel for 2 seconds.
You will hear a beep, the display flashes and you can start to change the time on the display.
To increase and decrease values, press the buttons .
To switch between clock, minute, time display format (12 hours / 24 hours) and weekday, press
Changing the clock format
To change the 12/24 format, press button . The display will show ON / OFF. Use the OFF value
for 24-hour format.
Saving into memory
To save the set values, press the button .