Tesla RoboStar T80 Pro Manual page 40

13. The vacuum cleaner starts cleaning automatically until the battery is almost empty, then the
vacuum cleaner automatically searches for the charging station and starts charging the battery.
14. To stop/pause the vacuum cleaner, press the "1" button on the top of the appliance or the "3"
button on the remote control. Once the cleaning has been interrupted and re-started, the
cleaned area may be repeatedly cleaned.
15. The vacuum cleaner automatically switches to "Standby" when it is idle for more than 10
minutes.
Remark: The "AUTO" mode is symbolized on the display as follows
CLEANING MODE: SMART
The device uses gyroscopic guidance for the most effective cleaning of the floor. Press the "2" button
on the top or the "5" remote control.
When activating „SMART" cleaning, the vacuum cleaner should always be in the charging station.
CLEANING MODE: TURBO
Pressing the "4" button on the remote control will increase the suction force, for deep cleaning. By
activating it, you will increase the suction power of the vacuum cleaner to maximum power, "HI"
appears on the display of the vacuum cleaner, press the "4" button on the remote control again to
return to the standard mode. "LO" (standard power) will appear on the display of the vacuum cleaner.