Description Of Appliance; Charging The Battery; Assembling The Vacuum Cleaner - Tesla PureStar E20 User Manual

DESCRIPTION OF APPLIANCE

CHARGING THE BATTERY

Make sure the vacuum cleaner is switched off. Connect the charging adapter to the mains and then
insert the adapter connector into the charging connector on the vacuum cleaner. Charging progress is
displayed on the battery charge status indicator, and 100% is displayed when fully charged. Avoid
draining the battery completely.
TIP - for longer battery life, we recommend recharging the battery no later than when the capacity
drops to 30%.

ASSEMBLING THE VACUUM CLEANER

Connect the turbo brush head to the tube and then insert it into the body of the vacuum cleaner. You
can attach the vacuum attachment directly to the body of the vacuum cleaner or to the tube.
1. Before using the appliance, press the dust bin lock and turn the dust bin to the "O" position (on the
left side of the vacuum cleaner/dust bin) and check that both filters are inserted. The antistatic
filter must be inserted with the side marked with a label facing up.
2. Turn the dust bin to the "lock" position.
3. Connect the tube (the side without the button) to the dust bin.
4. Connect the turbo brush to the tube (side with the button).
5. If you want to start cleaning, press the "On/Off" button. Press the "+/-" button to increase the
power - "MAX" mode. Press the "+/-" to switch the power to "Standard" mode. To switch the
appliance off, press the "On/Off" button again.
1. On/Off/MAX button
2. Charging connector
3. Dust tank lock
4. Battery charge status indicator
5. Dust tank
6. Body of vacuum cleaner
7. Release button for the lid of dust tank
8. Release button for the tube
9. Tube
10. Release button for the cleaning head
11. Turbo brush head
12. LED light