Table of Contents
Advertisement
Available languages
Available languages
Charging contacts and charging base
Clean the contacts on the bottom of the vacuum cleaner and the charging base with a soft cloth.
DESCRIPTION OF ERROR MESSAGES
Sound
1.
1x beep
2.
1x beep
3.
1x beep
4.
1x beep
5.
1x beep
6.
2x beep
7.
2x beep
8.
2x beep
9.
3x beep
10.
3x beep
11.
3x beep
12.
3x beep
13.
4x beep
14.
5x beep
15.
16.
Display
Cause
Left wheel error
E11
Right wheel error
E12
Left brush error
E13
Right brush error
E14
Main brush error
E15
The cleaner is not on
E21
the floor
Cliff sensor error
E22
Anti-bumper error
E23
The cleaner get stuck
E31
Fan error
E32
Water tank error
E33
Battery error
E41
Anti-bump sensor
E42
error
Gyro navigation error
E43
Low capacity of
LO
battery
HEPA filter blocked
Solution
Check left wheel
Check right wheel
Check left brush
Check right brush
Check main brush
Move cleaner into open space
and try again
Check cliff sensor
Check anti-bumper
Move cleaner into open space
and try again
Restart cleaner please
Check if water tank is installed
properly
Turn off/on cleaner or replace
battery
Turn off/on cleaner or replace
battery
Turn off/on cleaner or replace
battery
When robot is on standby,
make sure it is charged so
that it has enough power to
work at any time
Clean HEPA filter
Advertisement
Table of Contents
