Removing The Seat; Mounting The Seat - Husqvarna FS 450 2020 Owner's Manual

11.20

Removing the seat

11.21

Mounting the seat

SERVICE WORK ON THE CHASSIS 11
Preparatory work
–
Remove the air filter box cover. (
Main work
–
Remove screw
V01430-10
–
Raise the rear of the seat, pull the seat back, and lift it off.
H02218-10
Main work
–
Mount the front of the seat on the collar bushing of the fuel
tank and the rear in the bracket.
–
Push the seat forward.
–
Make sure that the seat is locked in correctly.
H02218-11
–
Mount and tighten screw
Guideline
Remaining screws,
chassis
V01430-10
Finishing work
–
Install the air filter box cover. (
p. 58)
1
.
1
.
M6 10 Nm (7.4 lbf ft)
p. 58)
57