Graco E-Flo 333587D Operation page 45

2. When the icon is showing, you can put the
system into setback by pressing the
This places all of the zones displayed on the screen
to setback and shows the setback temperature in
the zone setpoint/setback temperature box.
3. Press the soft key to take the system out of
setback.
If all of the existing heat zones are disabled, the
readings on the Heat Run screen will be gray. If Heat is
not enabled at the System Setup screen, the following
screen will be displayed when you select the Heat Run
screen from the Menu Bar.
333587D
See Heat Settings on page 28 to enable heat zones.
soft key.
Operation
45