Graco E-Flo 333587D Operation page 25

NOTE: The optional Communications Gateway Module
(CGM) is required to use fieldbus.
5. Press the soft key to save your changes and
exit editing mode.
Name the Style
You can also name the Style. While still in Style screen
1, Press the soft key to advance to a keyboard
screen to create or change the name of the style based
on your needs.
NOTE: The Style identifier is a system requirement. The
Style Name option is not required. It is intended as a
user-defined description for the application of each
dispensing style. An example might be: Trunk Hem. The
maximum length is 11 characters.
Use the and
to select letters.
The soft key changes back and forth from lower
and upper case.
The soft key erases everything you have typed.
The soft key is the backspace to delete one letter
at a time.
Press the soft key to save the name and exit the
keyboard screen. Press the
screen without saving. Both actions return you to Style
screen 1.
333587D
soft keys to scroll the keyboard
soft key to exit the
Apply a Style Setting Globally
While still in Style screen 1, pressing the globalize
soft key applies a style setting across all of the styles. A
message will appear prior to completing the change.
Press the soft key to complete applying the
selected parameter. Press the
the globalization.
Style Screen 2 - Delays
Use the ADM Directional Keypad (CH) to navigate to
Style screen 2.
This screen allows the user to define the delay settings
for a style.
NOTE: On/Off delay for the Dispense Valve and Motor
cannot be defined at the same time. Only the Dispense
Valve or Motor can be delayed.
NOTE: When in Local Control mode, Source cannot be
selected at this screen, but Values can still be entered.
The Source fields can be changed in Remote Control
mode.
Setup
soft key to cancel
25