Table of Contents
Advertisement
Troubleshooting
Troubleshooting
REMOTE SYSTEM ACTIVATION HAZARD
To avoid injury due to remote machine operation,
perform the steps below before troubleshooting. This
will prevent commands sent from the fieldbus or
display module from actuating the driver/pump.
1. Perform the Pressure Relief Procedure on page
48.
2. Turn off the yellow and red Disconnect Switch (AZ).
See Power Disconnect on page 7.
View Errors
Press the
soft key at iQ Menu screen 1 to access
the Troubleshooting screen.
This screen shows the list of errors with error codes
and descriptions. Use the arrow soft keys to scroll
through the list and select an error. Press the
key to advance to the QR Code screen for the selected
error. See Troubleshoot Errors on this page.
54
Press the
screen that allows you to search for an error by error
code. Type in the error code, then press the
key to advance to advance to the QR Code screen.
See Style Definitions on page 24 for additional
information about using the keyboard.
soft
soft key to advance to a keyboard
soft
333587D
Advertisement
Table of Contents
