Lan Configuration What You Have To Do First - Agilent Technologies 1290 Infinity II User Manual

4
LAN Configuration
What You Have to Do First
What You Have to Do First
The ELSD has an on- board LAN communication interface.
1 Note the MAC (Media Access Control) address for further reference. The
2 Connect the instrument's LAN interface to
34
MAC or hardware address of the LAN interface is a worldwide unique
identifier. No other network device will have the same hardware
address. The MAC address can be found at detector start up (see
"Configuration Using Instrument Front Panel"
•
the PC network card using a crossover network cable (point- to- point)
or
•
a hub switch using a standard LAN cable.
on page 36).
Agilent 1290 Infinity II ELSD User Manual