Do You Have Everything; The Power Button And Led - Agilent Technologies FieldFox N9923A Quick Reference Manual

Do You Have Everything?

FieldFox –To check for installed options, press

System then
Options
Phase stable jumper cable or adapters – Used

to connect the FieldFox to devices with various
connector types and gender.
Attenuators – Reduces power and prevents

damage to the FieldFox at the test ports.
Cal Kit – T-Calibration Kits or other devices.

MicroSD card or USB flash drive – Save files to

these devices for quick download to a PC.
USB Power Sensor – For making Power Meter

measurements. (Opt 302)
Battery charger or extra battery


The Power Button and LED

 To turn power ON, briefly press the power button.
The LED is green. The boot-up takes about 60
seconds.
 To switch to Stand by power (low battery drain)
briefly press the power button. The LED is amber
and blinks slowly. To turn power ON, briefly press
the power button. Power and settings are restored
instantly.
 To turn Power OFF (very low battery drain) press
and hold the power button until power is shut OFF
- about 4 seconds. The LED is OFF.
System Configuration
Show Options
then
2
then