DMP Electronics DUALCOM Series Programming And Installation Manual page 26

TIME CHG NO YES
HRS FROM GMT: 6
KYPD INPUT
NONE ECP
Digital Monitoring Products
24
TIME CHANGES
Choose YES to allow the communicator to request automatic time changes from the
SCS‑1R or SCS‑VR receiver. The receiver must be programmed to send and receive time
change updates from the host computer at least every 24 hours. The default is YES.
Choose NO to disable automatic time change requests.
When time zone is programmed YES, enter the number (0‑23) that indicates the
Greenwich Mean Time zone (GMT) where the communicator is located. The default is 6.
See Table 6 for GMT values.
GMT City/Time Zone
0 London, Monrovia, Lisbon
1 Cape Verde Island, Azores
2 Mid‑Atlantic
3 Buenos Aires, Georgetown
4 Atlantic Time (Canada), Caracas
5 Eastern Time (US, Canada) Bogota
6 Central Time (US, Canada) Saskatchewan 18
7 Mountain Time (US, Canada), Edmonton
8 Pacific Time (US, Canada), Tijuana
9 Alaska
10 Hawaii
11 Midway Island, Samoa
KEYPAD INPUT
Select ECP to enable communication between the communicator and an Ademco/
Honeywell panel using the +Z4‑ terminals. Using the Ademco/Honeywell ECP Bus, the
communicator can add, delete, and change user codes as well as arm and disarm the
Ademco/Honeywell panel. The communicator will forward alarm messages from the
Ademco/Honeywell panel to the central station.
Select NONE to allow zone 4 to function as normally programmed. The default is NONE.
See Ademco/Honeywell ECP Connection for examples of panel wiring and necessary
Ademco/Honeywell panel programming.
GMT City/Time Zone
12 Fiji, Marshall Island, Wellington
13 New Cadelonia
14 Guam, Sydney
15 Tokyo, Seoul
16 Hong Kong, Singapore
17 Bangkok, Hanoi
Dhaka, Almaty
19 Islamabad, Karachi
20 Abu Dhabi, Kazan
21 Moscow, Bagdad
22 Eastern Europe
23 Rome, Paris, Berlin
Table 6: GMT Time Zones
DualCom Programming and Installation Guide