Specifications - SMC Networks JXCEH Operation Manual

3. Specifications

3.1 Specifications
Basic specifications of the product.
Item
Compatible motor
Power supply
Current consumption
Compatible encoder
LED display
Locked
Cable length
Cooling method
Operating temperature range
Operating humidity range
Insulation resistance
Weight
[EtherCAT communication]
Items
Protocol
Communication speed
Communication method
Communication cable
Setup file
Occupied area
Connectable nodes
Vendor ID
Network topology
Step motor (servo 24 VDC)
Power supply voltage: 24 VDC±10%
200 mA or less (Controller)
Refer to the specification of actuator to be connected for total power
consumption.
Incremental A/B phase (800 pulse/rotation)
Battery-less absolute encoder ( 4096 pulses/rotation)
LED
L/A1 Link/Activity1
L/A2 Link/Activity2
PWR Power supply
ALM Alarm status
RUN EtherCAT communication status.
ERR EtherCAT communication error status.
With unlocking terminal
Actuator cable: 20 m or less
Air-cooling type
0°C to 40°C
No freezing
90% RH or less (No condensation)
Between the external terminals and case
50 MΩ (500 VDC)
260 g (Direct mounting type)
280 g (DIN rail mounting type)
EtherCAT (Conformance Test Record V1.2.8)
100 Mbps
Full duplex/ Half duplex (automatic negotiation)
Standard Ethernet cable (STP, CAT5 or higher, 100BASE-TX)
ESI file (download from SMC web site).
Input 20 byte / Output 36 byte
Max. 65,535 nodes
0114h (276)
Refer to the EtherCAT topology
-13-
Specifications
Details
Specification
No. JXC※-OMY0008