Important Information; How To Use This Manual; Technical Support; First Level Support - Bender ISOMETER iso1685D Series Manual

1. Important information

1.1 How to use this manual

This manual is intended for qualified personnel working in electrical en-
gineering and electronics!
Always keep this manual within easy reach for future reference.
To make it easier for you to understand and revisit certain sections in this manual, we
have used symbols to identify important instructions and information. The meaning of
these symbols is explained below:
This signal word indicates that there is a high risk of danger that will re-
sult in electrocution or serious injury if not avoided.
DANGER
This signal word indicates a medium risk of danger that can lead to
death or serious injury if not avoided.
WARNING
This signal word indicates a low-level risk that can result in minor or
moderate injury or damage to property if not avoided.
CAUTION
This symbol denotes information intended to assist the user in making
optimum use of the product.
5
Important information

1.2 Technical support

For commissioning and troubleshooting Bender offers you:

1.2.1 First level support

Technical support by phone or e-mail for all Bender products
• Questions concerning specific customer applications
• Commissioning
• Troubleshooting
Telephone: +49 6401 807-760*
Fax: +49 6401 807-259
In Germany only: 0700BenderHelp (Tel. and Fax)
E-mail: support@bender-service.de

1.2.2 Repair service

Repair, calibration, update and replacement service for Bender products
• Repairing, calibrating, testing and analysing Bender products
• Hardware and software update for Bender devices
• Delivery of replacement devices in the event of faulty or incorrectly delivered
Bender devices
• Extended guarantee for Bender devices, which includes an in-house repair service or
replacement devices at no extra cost
Telephone: +49 6401 807-780** (technical issues)
+49 6401 807-784**, -785** (sales)
Fax: +49 6401 807-789
E-mail: repair@bender-service.de
Please send the devices for repair to the following address:
Bender GmbH, Repair-Service,
Londorfer Strasse 65,
35305 Grünberg
iso1685DP_D00272_03_M_XXEN/08.2017